Raymarine RSW Wired - Smart Performance Wind Transducer - Short Arm w/30M Cable [E70670]
Raymarine RSW Wired - Smart Performance Wind Transducer - Short Arm w/30M Cable [E70670]
RSW Wired - Smart Performance Wind Transducer - Short Arm with 30M Cable
The RSW Wired, Smart Wind transducer is a professional-level wind sensor designed to deliver highly accurate calibrated wind speed and direction data. Supplied with a 30-meter Smart Wind mast cable as standard.
Install & Go!
Raymarine Smart Wind technology delivers expert-level accuracy without the need for additional, expensive processors or extensive calibration and set-up.
Finely Tuned
Through rigorous wind tunnel testing, we've fine-tuned and balanced the instrument to ensure that data from the masthead is accurate and consistent.
Sail Smarter
Trusted, high-accuracy True Wind data combined with the Alpha Performance Displays and Axiom Chartplotters let you sail smarter.
Specifications:
Length
- Wind transducer (including cable): 657.762 mm (25.90 in)
 - Wind transducer (excluding cable): 540.712 mm (21.29 in)
 - Wired gateway: 155.61 mm (6.13 in)
 
Width
- Wind transducer: 46.96 mm (1.85 in)
 - Wired gateway: 47.38 mm (1.88 in)
 
Height
- Wind transducer: 305.86 mm (12.04 in)
 - Wired gateway: 30.61 mm (1.21 in)
 
Power
- Nominal supply voltage: 12 V dc (via SeaTalk NG)
 - Operating voltage range: 9 V to 16 V dc
 - Power Consumption: < 100 mW
 - Fuse rating: Ensure that the SeaTalk NG backbone is protected by a 5 A fuse
 - NMEA 2000 LEN (Load Equivalency Number) - based on nominal 9 V rating: 1
 
Environmental
- Operating temperature range: -25°C to +55°C (-13°F to +131°F)
 - Storage temperature range: -30°C to +70°C (-22°F to +158°F)
 - Relative humidity: Masthead: 100%/Below deck: up to 93% @ 40°C
 - Waterproof rating: Wind transducer: IPx6/IPx7/Wired gateway: IPx3
 - Wind: 115 mph (185 kph)
 - Vibration: EN 60945:2002 (exposed)
 
What's In The Box?
- No.10 x 3/4" self tapping screws x 4 (for mounting the wind transducer)
 - No.7 x 3/4" self tapping screws x 2 (for mounting the gateway)
 - 40 mm (1.57 in) heat shrink tube (required to insulate ground wire when shortening the mast cable)
 - Ring crimp terminal (required for additional ground connection when the gateway is not mounted on a metal surface)
 - Mast cable, 30 m (98.43 ft) reel
 - Documentation
 - Wind transducer
 - Smart wind-wired gateway
 - SeaTalk NG to DeviceNet adaptor cable, 120 mm (4.72 in)
 
Couldn't load pickup availability
                      
                        
                        
                          Product features
                        
                      
                    Product features
                      
                        
                        
                          Materials and care
                        
                      
                    Materials and care
                      
                        
                        
                          Merchandising tips
                        
                      
                    Merchandising tips
Share
![Raymarine RSW Wired - Smart Performance Wind Transducer - Short Arm w/30M Cable [E70670]](http://supplycentralstore.com/cdn/shop/files/102244XL.jpg?v=1742894181&width=1445)